High Quality Manual Cast Steel Knife Gate Valve
|FOB Price:||US $50-500 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $50-500/ Piece|
|Payment Terms:||L/C, T/T|
- Type: Direct-acting
- Connection Form: Flange
- Actuator: Manual
- Thread Position of Valve Rod: Inside Gate Valve
- Standard: GB
- Hand Wheel Material: Cast Steel
- Trademark: Jinyang
- Origin: Yantai, Shandong, China
- Material: Stainless Steel
- Pressure: Low Pressure
- Seal Surface: Parallel Gate Valve
- Usage: Flow Control
- Application: Industrial Usage, Water Industrial Usage
- Certificate: ISO9001:2008
- Specification: DN 50 DN75 DN100 DN150 DN200 ETC
- HS Code: 84819010
Knife Gate Valve Feature
1, It's a linear motion valve, general match with on-off type Multi-turn actuator.
2, Simple operation, is one of the most common on-off valve, which uses gate plate up and
down movement to turn on and turn off the fluid medium in the pipe.
3, Widely used in electric power, metallurgy, petroleum, chemical, paper, sewage
treatment and other industries.
Gate Valve parameters
design standard : GB/T12234
body material: cast steel
Drive mode: electric , pneumatic and manual
packing: Asbestos and flexible graphite
sealing face: alloy steel or hard alloy
nominal pressure: PN1.6~20.0MPa
medium: water,oil,steam etc
specifications and models:
Jinyang can provide knife gate valve with diameter from φ50mm to φ300mm.
It is widely used in chemical, petroleum, power generation, mine and other industries, and
It's suitable for the occasion of large-scale cooperation, and rapid control of the pipeline
Details of knife gate valve
1. Quality control
All the equipment offered by Yantai Jinyang Cyclone Engineering Co., Ltd. are produced by China national standard drawings, nonstandard equipment will be produced by the drawings confirmed by clients. Yantai Jinyang Cyclone Engineering Co., Ltd. strictly follows ISO 9001: 2008 Quality management system. Most equipment will be test for at least 8 hours in the factory before delivery. There is record in computer for each equipment, spares can be easily confirmed when it is necessary.
2. Way of payment
T/T, against copy of B/L, L/C, D/A, D/P, West union, etc. All can be negotiated.
3. Delivery time
Normal delivery time within 10 to 20 working days, complete production line or larger equipment may take longer. Exact delivery shall be confirmed when place the order.
4. Trade terms
Typically EXW, FOB, CIF, CFR, DAF follows International Rules for the Interpretation of Trade Terms 2010(INCOTERMS 2010).
5. Shipping lines
Priority rule based on clients' request, and freight cost, service, shipping date, date of arrival shall be considered.
Jinyang has several experienced technicians with passports ready to go for installation, when installation service is needed, the client should pay for technicians' round way air tickets, salary(shall be confirmed before leaving), food and lodging, most importantly to guarantee the technicians' safety.
7. Equipment warranty
Equipment from Yantai Jinyang Cyclone Engineering Co., Ltd. with 18 months warranty, can be extended to 24 months as request.