Flanged Pn16 Stainless Steel Knife Gate Valve Manufacturers
|FOB Price:||US $200-250 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $200-250/ Piece|
|Payment Terms:||L/C, T/T|
- Model NO.: DN350
- Material: Stainless Steel
- Pressure: Low Pressure
- Seal Surface: Parallel Gate Valve
- Usage: Flow Control
- Application: Industrial Usage, Water Industrial Usage
- Specification: DN100
- HS Code: 84741000
- Type: Straight-through
- Connection Form: Flange
- Actuator: Manual
- Thread Position of Valve Rod: Outside Gate Valve
- Standard: GB
- Trademark: Jinyang
- Origin: Yantai, Shandong, China
1. Name: Knife Gate Valve
2. Model: DN50-DN350
3. Overlook: Wafer, Lug. Flange
4. Nominal Pressure: GB, API, JIS, EN, DIN (PN10, PN16, 150LB, 10K, Table E/D, DIN)
5. Operation: Handwheel, Electric, Pneumatic, Hydraulic, Chain Wheel, Electric-Hydraulic, Bevel Gear
6. Material: Carbon Steel, Stainless Steel, Cast Iron
7. Knife: 2Cr13, SS201, SS304, SS316, SS316L, SS310, 2205
8. Sealing: H, W, F, X (NBR, EPDM, Viton)
Product feature :
a The knife gate valve is composed of opening and closing institutions , rubber sleeve and stainless steel gate,which is flexible to open.
b The flow parts adopt material of flexible anti-corrosion and high abrasion material,which has
features of large over-flow area, small resistance, avoiding the wear and tear on the metal shell,and long lifetime.
c The knife gate valve adopts clip-on design, footprint of the valve body is small,and it's easy to install.
d a vent pulp washing device is installed on the bottom of the body.Every opening and closing can automatically clean the solid residues on the bottom of valve ,Which is to avoid the condition that the valve can't closes strictly caused by the silting of the solid slurry.
e Before leaving the factory, the knife gate valve produced by Jinyang should pass the pressure test,and it does not have to take apart ,wash and adjust in installation.
f The valve can be installed on the pipeline arbitrarily,and there is no limitto the medium flow direction .
g It's suitable for the temperature -30oC to 80oC,if you need higher temperature ,the production need to be custom-made
1. Quality control
All the equipment offered by Yantai Jinyang Cyclone Engineering Co., Ltd. are produced by China national standard drawings, nonstandard equipment will be produced by the drawings confirmed by clients. Yantai Jinyang Cyclone Engineering Co., Ltd. strictly follows ISO 9001: 2008 Quality management system. Most equipment will be test for at least 8 hours in the factory before delivery. There is record in computer for each equipment, spares can be easily confirmed when it is necessary.
2. Way of payment
T/T, against copy of B/L, L/C, D/A, D/P, West union, etc. All can be negotiated.
3. Delivery time
Normal delivery time within 10 to 20 working days, complete production line or larger equipment may take longer. Exact delivery shall be confirmed when place the order.
4. Trade terms
Typically EXW, FOB, CIF, CFR, DAF follows International Rules for the Interpretation of Trade Terms 2010(INCOTERMS 2010).
5. Shipping lines
Priority rule based on clients' request, and freight cost, service, shipping date, date of arrival shall be considered.
Jinyang has several experienced technicians with passports ready to go for installation, when installation service is needed, the client should pay for technicians' round way air tickets, salary(shall be confirmed before leaving), food and lodging, most importantly to guarantee the technicians' safety.
7. Equipment warranty
Equipment from Yantai Jinyang Cyclone Engineering Co., Ltd. with 18 months warranty, can be extended to 24 months as request.